Welcome to

Enhanced Control Systems

We specialise in the design, build, installation and commissioning of bespoke electronic control systems.

Good design is in the detail

Scroll to find out more

Our Services

We offer a wide range of services enabling our clients to place a single order for turnkey project solutions. Each project we undertake is bespoke and tailored to the needs of the client and their particular system requirements. We believe that good design can only come from close attention to the detail.

Illustration of a flow diagram

Complete System Design

Starting with assisting our clients with concept design and going on through to producing functional specifications, drawings, cable schedules, factory and site acceptance test documentation, we offer all aspects of system design.

Illustration of an electronic panel

Panel Manufacture

We are a UK based panel manufacture. We design and build bespoke panels from low voltage PLC control systems up to 3000 amp power distribution and Motor Control Centres.

Illustration of electronic control software

PLC, SCADA, BEMS Software

Our in house team can write PLC code to control any system or process. We also configure the associated SCADA / HMI software to give intuitive operator interface. While Allen Bradley, Mitsubishi and Trend are our specialities, all manufacturers can be catered for.

Illustration of a power supply sign

Standby Power Generation Control

We have a wealth of experience in the standby power sector. Generator controls upgrades are a speciality of ours along with loading and load shedding control systems.

Illustration of a control panel

Process Control

PLC, relay and pneumatic systems can all be designed and built for the control of any process. We will also specify and supply all type of instrumentation and control valves.

Illustration of an LNG storage container

LNG Control and Safety Systems

Control and safety systems for the storage, pressurisation, evaporation and delivery of Liquid Natural Gas to both gas turbines and reciprocating engines.

Illustration of a bar graph increasing

PLC Upgrades

We are able to offer cost effective PLC2 and PLC5 upgrade solutions. This is done using specifically designed equipment which means very little down time for physical hardware replacement and no need for I/O revivification.

Illustration of a toolbox

Onsite Installation and Commissioning

Cable containment and cable installation. Glanding and terminating. Compex hazardous area installations. Data and Comm’s installation. All tested and certificated to the latest standards.

Our Clients

We work with a wide range of clients across multiple sectors. These include pharmaceutical, gas, electric and water utilities supply, standby power, building management, nuclear power, etc.

  • Anabas

  • Apex

  • AVK-SEG

  • Becker Marine Systems

  • Bells Power Logo

    Bells Power

  • Carillion Logo

    Carillion

  • CBRE

  • Chart Ferox

  • DS Smith

  • DSL

  • Dyrhoff

  • Fountaineers

  • Global Associates

  • ICW Power

  • Magnox

  • MJ Wilson

  • Pfizer Logo

    Pfizer

  • Scotia Gas Networks

  • Sekisui Logo

    Sekisui Diagnostics

  • Shepway Commercial

  • SSE

  • Synthomer

  • Veropak

Blog

Keep up to date with everything that’s going on. Be sure to check back regularly for updates.

About Us

The company was established in 2006 and after a year working alone on design and specification projects, I took on my first member of staff and rented a small industrial unit. The company soon outgrew our first premises and we moved to our current location with three times as much office and panel building space.

We have continued to grow our workforce and now have a wealth of hand picked, highly skilled engineers and electricians. We have already seen one apprentice through to qualified electrician status and intend to take on one or two more this year.

When asked, "I describe us as a controls company as our wide engineering background means we are not limited to any one particular field". We will always get to understand the whole picture for any project we undertake. In this way we can ensure that the correct control systems are put in place to achieve the desired outcomes. Good design is in the detail.

Graham Port.
Managing Director.

Our Partners

We have developed a close working relationship with Allen Bradley, through Routeco. We hold 3 toolkit licences with them and have access to all of their programming software and back-up technical assistance. More recently we have established a similar relationship with Mitsubishi through BPX

  • Allen Bradley Logo

    Allen Bradley

  • Mitsubishi Logo

    Mitsubishi

Case Studies

Our work covers a diverse range of applications. Here are just a few of the many projects we have completed

  • Pfizer PDF Automation Controls Lifecycle Upgrade

    After a good number of weeks of long days and no weekends off I am pleased to say that the installation phase of the main project is nearing completion. Commissioning of the near 4,000 I/O points has already started and is well ahead of schedule. The ECS team has worked tirelessly with the clients project […]

    Read the full story
  • Battery Power to Test Batteries

    ECS have recently completed a project with our client, to provide stored energy to a vehicle test establishment in Bedfordshire. We designed, built, programmed and commissioned the complete controls and battery integration system for this 4MW project. This new facility is providing battery testing to most of the major car manufactures. They are carrying out […]

    Read the full story
  • ECS ‘Display’ their installation and commissioning skills off

    ECS are proud to announce another new  partnership with Fountaineers. Fountaineers Limited specialise in the design and installation of bespoke water features and fountains, their latest project being the Aldgate Project where the main attraction is the water feature display, Aldgate Project ECS have designed, built and installed the main control panel which not only […]

    Read the full story
  • A Recipe For Great Success

    ECS and ABE recently completed their first project together, forming a new partnership. Atlas Bagging Equipment required an operator control system to interface with its industrial blend mixer. ABE’s functional requirements were taken onboard and together we developed a control system complete with a touch screen HMI, VSD drive control, discharge control station and various […]

    Read the full story
  • Pfizer Filter Dryer

    ECS had been tasked with the design, installation and validation of their new state of the art Filter Dryer at their Pilot Development Facility, based on the sandwich site in Kent. Disinvestment – The first stage of the project was to disinvest the current mobile filter dryer freeing up plant and Control capacity. Design – […]

    Read the full story
  • ECS hit the seas again!

    Another busy month for Enhanced Control Systems leading up to Christmas. We are currently working on several projects, one of which is for our new client DFDS Seaways. ECS have been tasked with replacing the control system to the car decks supply and extract fans across all 3 ships using the Dover to Dunkirk crossing. […]

    Read the full story
  • Chromotography Cold Room Chiller Changeover

    Chromotography Cold Room Chiller Changeover   The chromatography cold room is one the most critical areas at the client’s facility being the primary location for the purification and storage of modification enzymes. The chromatography cold room is a validated room and is required to maintain a controlled temperature between 2 to 10°C around a set […]

    Read the full story
  • ‘From Turnkey To Turkey’

    ECS have successfully completed yet another turnkey project comprising of a milling machine control system for a pharmaceutical company based in Turkey. The machine is designed to mill various products.  Due to the hazardous nature of the milling process the system requires nitrogen purging in most instances with various safety controls to be implemented before […]

    Read the full story

Our Team

Our team have many years of experience. Please feel free to contact any of us for further information, advice or for a quote.

Graham Port

Managing Director

Graham Port

Andy Ladbrook

Director Of Operations

Andy Ladbrook

Andy Thompson

Project Engineer

Andy Thompson

James Barton

Project Engineer

Ashley Elliott

Design Engineer

Ashley Elliot

Gary Davies

Project Engineer

Glen Rickard

Project Engineer

David Biagi

Design Engineer

Max Ladbrook

Trainee Project Engineer

David Devine

CAD Design Engineer

Ian Killian

Electrician

Liam Smith

Electrician

Duncan Drage

Electrician

Lewis Laming

Electrician

Lewis Laming

Wayne Williams

Trainee Electrician

Lee Ramsden

Electrician

Paul Williams

Electrician

Josh Bisgrove

Electrician

Garry Broad

Panel Wireman

Samuel Weller

Panel Wireman

Tyler Harman

Trainee Electrician

Charlie Birchmore-Emes

Apprentice Electrician

David Dolan

Apprentice Electrician

Kian Sheridan

Apprentice

Charlie Ward

Apprentice

Anne-Marie Hayman

Office Administrator

Anne Marie Hayman

Latest jobs

Check here to see our latest vacancies!
If you’d like to apply, simply click the 'More info' button for further details, then email us with your CV and covering letter.

We look forward to hearing from you!

Generator Controls Engineer

Posted on 6th Jul 2023

We’re recruiting for a Generator Controls Engineer with in-depth experience of working in the power generator industry

Design Engineer

Posted on 6th Jul 2023

We’re looking for a customer focused, self-motivated Design Engineer to ensure our projects are delivered on time, within budget and meet our customer’s specifications and expectations.

Project Engineer

Posted on 17th Jan 2023

We’re looking for a Project engineer with experience in control and electrical installation from concept to completion, with the ability to quote client installation works.

Industrial Controls Electrician

Posted on 13th Jul 2021

We’re looking for an Industrial Controls Electrician to work as part of the installation team providing electrical installs across our site locations – ideally with experience within the industrial sector and knowledge of both electrical and instrument control cable installations.

Contact Us

  • Enhanced Control Systems Ltd, Unit 18 Integra:me, Bircholt Road, Parkwood Trading Estate, Maidstone, Kent, ME15 9GQ, UK

  • 01622 755257
Fields marked with a * are required